Adapter for diamond hole saw for deeper drilling - 33mm Lux-Tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for diamond hole saw for deeper drilling in soft air concrete blocks - 33mm Lux-Tools
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Adapter for diamond hole saw for deeper drilling in soft air concrete blocks - 33mm Lux-Tools
Can be mounted by 12mm socket wrench or mounted on threaded M6 rod for easier start of drilling. Extend the rod to the front of the diamond crown and cut it in the middle for easier drilling. The rod will act as a pilot for the crown. Mount the adapter to the rod using two M6 nuts and one washer.
With original mounting it's not possible to drill holes deeper then the lenght of the hole saw. With this adapter you can drill much deeper holes. I've drilled holes in 40cm thick wall using this adapter.
You might need to file some imperfections inside the hole saw to insert it onto the adapter.