AirRohr Fixing Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some simple brackets for fixing the AirRohr air quality meter.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This model is a simple bracket for easy fixing the AirRohr air quality meter-weather station.
For more information (on how to DIY or buy pre-built) please visit: https://sensor.community/en/sensors/airrohr/
It is best to print a pair of these laying flat.
You will also need a pair of 300mm long zip-ties and 4 pieces of ~3x12mm countersunk head screws.
I have also included a template for marking the screw positions for an even easier mounting. Please print this at a 1:1 ratio / A4 size paper, then use to mark the position of the screws.
If you like the design please show it by clicking the like ♥ button. Thank you!