Ultimate Modular Ant Farm (Formicarium)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Id like to be able to expand my nest without any tubes whenever i need to and id like it one day to be very big.…
- Ocena
- 0 / 5
- Polubienia
- 106
- Pobrania
- 589
- Wydruki
- 0
- Wyświetlenia
- 6743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Id like to be able to expand my nest without any tubes whenever i need to and id like it one day to be very big. Problem is i have a small printer. Well that is why i made this. Small form factor modules that connect to each other. The smallest of printers can print them.
I use 3mm thick glass on top cut to size. You can glue it or not. Glass is preatty heavy.
Have all sorts of conectors for pretty much any test tube size(12,13,15,16,18 and 20mm) and i have a connector for 16mm tubing just in case if i need tubing.
Connectors for test tubes are ment to be heated a little bit and test tubes pushed into the plastic so i get a good seal.
You can find the complete STLs in the .rar file uploaded.
If you need a special part(e.g. diffrent tubing adaptor) feel free to contact me and il make it.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Infill:
30%
Notes:
Would reccomend thicker shell but is really good with 30% infill and stock setting of Cura.
Category: Pets