Radiomaster zorro gimbal protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple gimbal protector for the radiomaster zorro.
- Ocena
- 4,636 / 5
- Polubienia
- 44
- Pobrania
- 1090
- Wydruki
- 14
- Wyświetlenia
- 3576
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the zorro, but I needed something to protect the gimbals in my bag. So I whipped this together.
It's a simple gimbal protector for the radiomaster zorro.
Rotate 180 (print upside down) in your slicer to print without support.
Leave comment, and post a make if you liked this model
25-02-2022: I've changed stick ends to wider and more grippier stick ends. zorro_gimbal_protector-wide should accommodate up to 10mm wide stick ends
15-02-2022: I originally designed this to be printed in PETG. But I noticed that v2 would break pretty easily at the plates that holds run parallel to the lanyard hook when printed out of PLA. So in v3 I've decreased the depth of the knobs and added more of a chamfer where the plates attach to the body.
14-02-2022: redesigned the "latch" in v2 due to a slight misalignment between the knobs and the lanyard hook