1 / 3
Pencil Lead/Pen Nib for Wacom ONE | NO PRINT NEEDED — zdjęcie 1
1 / 3

Pencil Lead/Pen Nib for Wacom ONE | NO PRINT NEEDED

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

You don´t even need a 3d Printer for this model

Ocena
4,667 / 5
Polubienia
94
Pobrania
159
Wydruki
7
Wyświetlenia
2936
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

Use your leftover Filament for a replacement for the Wacom Tablet (Wacom One CTL-672) Pen nibs. To be clear...YOU DON'T NEED A 3D PRINTER (I just attached a sliced gcode and a STL because it's needed for the "last meter contest") You need to snip the filament flush at 27mm. Put the Filament in the Pen an round the edges with a nail file. And voila, a functional Pencil lead / Pen Nib. 

Don't use the filament coming out of the extruder because this part of the Filament is squished to much.

You can store your beloved pencil in the featured Pen holder 4-1

https://www.printables.com/model/204145-pen-holder-4-1-with-a-little-suprise

  • added Pen nib in describtion and model name(thx @Catdad Workshop)

Tagi