1 / 3
Training Poi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful for beginners to train with or to give a gifts.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (36)Powiązane
This is the design for some poi. Useful for beginners to train with or to give as a gift.
Obviously these should not be lit on fire. But the loops can be used to attach ribbons or yarn.
Assembly Instructions
- Tie a knot on one end of the rope.
- Thread the rope through both the top print and then through the grip.
- Tie a second knot and cut the rope to the desired length.
- Note that the length will increase slightly as the knots tighten during use.
- Attach the bottom print to the top print and bolt togethor.
Non printable parts required:
- 8mm Cord/Rope (preferrably not nylon)
- 6x M6 Nuts
- 6x M6 Screws
Print Details
- Nozzle: 0.4mnm
- Layer height: 0.2mm
- Material: PLA
- Printer: Ender 3v2
- Support Required