Spool Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rough gauge to indicate whats left on your spool.
- Ocena
- 4,75 / 5
- Polubienia
- 243
- Pobrania
- 935
- Wydruki
- 11
- Wyświetlenia
- 4878
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Hook it onto the edge of the spool to measure what filament you have left, wouldnt say its accurate but gives a fair indication on what is left.
Ive made 3 versions length (metres) weight(KG) and Percentage(%).
Fairly quick to print 30-40 minutes.
I printed these ones on their sides, I intend to colour the letters with a sharpy , but you could print them letters facing up and pause at layer height and change filament to desired colour.
I printed on its side so no supports necessary , neither did I need adhesion , but that may depend on you printer or print bed, as usual I printed with 20% infil at 0.2mm resoloution.