Meganoodle Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pen holder inspired by my Meganoodle avatar.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
A little pot based on my avatar, If anyone is interested Ive uploaded individual pieces so it can be printed in different colours, and two variations of the complete model , on with cape and one without.
Printed with 30% infil , 0.2mm resolution.
I would advise brim adhesion for the cape.
The cup will print with no support but you will get artifacts under the hands, I printed the 2nd model with support , it turned out much better.
There are locators and slots so the pieces should fit together quite well, but i found some holes I needed to open up a tiny bit.