Laptop/Notebook holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw these holders onto the edge of a board and you get a notebookholder where your computer won't slip off.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 770
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Made for the “last meter” contest. Although all parts together can be printed for less than 4m filament (not tested with the uploaded gcode, since I have no Prusa printer yet, but a comparable setup was used on my printer successfully, see image), you can/should print each piece separately with your favourite settings instead! This way you can utilize your last meters more easily, since each piece needs less than 2m of filament, even with fat/robust settings.
Assembly guide: print a pair that suits your laptop best (I added versions with 11mm, 14mm and 17mm height, if you need a smaller or bigger version, scale to your liking), and screw them onto your board (board thickness should be bigger than 12mm). Pre-drill a small hole where you want to mount the holders, this way you will get the screws easier into the board. The holders are slanted on one side, just test which one fits better on the left/right side (I use the slanted parts on the outer ends).
| Category | Setting | Comment |
|---|---|---|
| Nozzle | any | in range 0.25-0.8mm none should be problematic (tested with 0.6mm) |
| Layer height | 0.1-0.2mm | The screwhole typically works better (less/no distortions) with small layer height, I tested it with 0.1mm |
| dimensions | ~3cm x 2.5cm | |
| support structure | none | no problematic overhangs (screwhole has minimal overhangs, but with small layer height no problem |
| perimeter | 3 or more | you can print it with thinner walls, but make it sturdy for longevity |
| infill | 7-50% | more infill means sturdier |
| material | all nonflex materials work | in case of PLA: no brim or heated bed needed, generally recommended to use ironing |
| complexity | easy | every printer should be able to deal with this model |
| extra items | screws, board | for a full make you need 2 screws (hole designed for 3.5x25mm screws or longer and of course a board (>12mm thickness) to mount them on |