REP Ratchet 1/4" hex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the R.E.P. Ratchet I created this version, that allows for a 15 degree ratchet i.s.o. the original 45 degree
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 97
- Wydruki
- 2
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I did not like the heave ratcheting (of the original mechanism) and the need to have a 45 degree of movement. So I experimented to have a 15 degree ratchet. I also increased the handle size to fit my hands.
Not sure why the license does not allow for remixes, thus this design has to stand on it's own.
The RatchetT.stl file is to fine tune your slicer the get the internal hex hole right.
I slice with Cura and it has a setting “Hole Horizontal Expansion” for this purpose.
Printed on an Ender 3 Pro with PLA 4043D at .2mm layer with a .4mm nozzle.