1 / 6
WITH AND SMESSON 2.0C Dry Fire Stand — zdjęcie 1
1 / 6

WITH AND SMESSON 2.0C Dry Fire Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dry Fire stand for a *REDACTED BECAUSE OF C&D for USING THE LETTER S AND W* 2.0C 4 inch with spots for all the goodies.

Ocena
5 / 5
Polubienia
41
Pobrania
259
Wydruki
0
Wyświetlenia
1927
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This is a dry fire stand for a TAN AND BLACK POLYMER PISTOL COMPACT SECOND GENERATION PITOLS that is  4 inches. It has a cubby hole for a Mantis and a 15rd magazine (tested with a normal 15rd mag and +2 extension). There are shallow cuts on the front for a red dot optic cover and laser boresighters / dummy rounds. This will probably work with other dual stack 9mm handguns but I don't have any other pistols to test it with :)

Printed on an Ender 3 S1 with Hatchbox Orange at 230C, 70C on a pei bed.

Tagi