1 / 4
LG Monitor Stand 29" 29UM68-P — zdjęcie 1
1 / 4

LG Monitor Stand 29" 29UM68-P

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I lost the vertical part of my monitor stand during my move. Designed this replacement part to fix it :) It's a little…

Ocena
0 / 5
Polubienia
6
Pobrania
65
Wydruki
0
Wyświetlenia
1185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

I lost the vertical part of my monitor stand during my move. Designed this replacement part to fix it :) It's a little higher than the original. I had not too much time, so it's rather a practical than a beautiful design. Most people won't see the back of their monitors anyways.

The hole on the bottom (where the screw from the foot connects) is made for a threaded insert (M4 10mm).

There is a little black screw on the bottom of the mount on the display. Please remove it to allow the stand to slide fully over the mount (the screws blocks the mount from fully sliding over).

Print this with 2mm walls (5 lines with 0,4mm nozzle) to make it strong. Open the 3mf file to see my settings. Infill doesn't matter too much, I used 10%. Printed with PLA.

Make sure to print it laying down on the flat side! If you print it upright the weight of the screen creates forces parallel with the layer lines making the stand much weaker. Printing it laying down makes the forces perpendicular.

If your printer does decent with overhangs you don't need supports in this orientation.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2mm

Infill:

10%

Filament: Fillamentum PLA Traffic Black


Notes:

2mm shells, print laying down with the flat side down

Category: Office

Tagi