Moss pole / climbing aid (modular)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moss pole / climbing aid for plants in modular design.
- Ocena
- 4 / 5
- Polubienia
- 79
- Pobrania
- 371
- Wydruki
- 1
- Wyświetlenia
- 3356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
You can stack up multiple modules on top of the ground anchor and optionally add moss inside the modules for plants which need the moisture. I recommend to print in PETG.
The module should be printed with the detents up or with brim because of the small surface area. The detents themselves (and the slide-ins) need a bit cleaning (remove small blob) after print, but you don't need support for them.
UPDATE Feb 2023:
Reinforced the connection part of the module which had a tendency to break (especially when parts where a bit rough) and added a heavy duty anchor because the whole thing got a bit wobbly when stacking more than 4-5 modules on top of each other.
Update Aug 2023:
Added more simple module, prints with no problems on a MK4 in PETG.