Paper Rocket and Paper Dragster Nose Cones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are nose cones for paper rockets and paper dragsters.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
These are meant to attach to paper rockets and paper dragsters. They are modeled for use with ½ inch PVC rollers (0.840 OD), but could easily be scaled for other sized rollers. On the rear of the nose cone is a small hole meant for a size W114 eye screw for testing in a vertical wind tunnel (I have not yet gotten this to work consistently).
I use these with a box fan and a rudimentary wind tunnel made from a box fan and a pair of folding tables to measure the wind resistance of different nose cone geometries in middle school science classes.
Note: To empirically compare the performance of nose cones, I recommend adjusting infill, wall thickness, and/or top and bottom layers so that each printed nose cone has a similar mass.