FrameStation Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FrameStation case for Framework Motherboard
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 869
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
This is a "Modern Game Console" case for the Framework Motherboard.
All joints are designed to be used with M3 heat inserts. The only glue used in this project is to hold the 4 outer panels together once printed. If you would like extra rigidity you can also glue in between the inner panels as well
The split STEP file is designed to cut the case to fit on standard 220mm 3D Printers
To use the expansion cards you simply need 4 short USB c extension cables to run from the motherboard to the front/rear expansion card slots
The extra port on the back of the case is designed to allow you to add LED lights inside the case and power with standard 12v power
Can also be found on Github at: https://github.com/whatthefilament/FrameStation