1 / 11
ULTIMATE DPS5005 Case (up to 190W) and built in separate 5V PSU (10W) — zdjęcie 1
1 / 11

ULTIMATE DPS5005 Case (up to 190W) and built in separate 5V PSU (10W)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This case combines many features and is a convenient solution for all power-needs that you might have on your desk!

Ocena
0 / 5
Polubienia
12
Pobrania
68
Wydruki
0
Wyświetlenia
718
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Overview:

A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D printed enclosure inside the main enclosure).

Both supplies can be turned on and off independently of each other.

Two fans on the side cool the electronics. A DC-DC buck converter converts the 48V to 12V or lower for the fans. You might want to add a switch to turn the fans off if not needed.

I have supplied the Fusion360 project files, edits and tweaks are easily made!

 

Size: 122.50 mm x 135.00 mm x 83.00 mm (depth (length), width, height)

 

Build it completely at your own risk! I take no responsibility whatsoever for any damages. Only work with mains electricity if you have the necessary qualifications!

Here are the components used (I provided links to exemplary offers):

All links provided are for reference only and to help you find the correct part.

Use the renders to see how to assemble the case. Print with the front side facing the build plate. No supports should be necessary.

Just a word of caution, the space inside the PSU is quite crammed, you need a bit of patience to assemble it. :)

I made two renders of the case: 

Tagi