3018 Offline Controller Mount V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a different version to the mount previously designed. This design is mounted at the front of the CNC machine,…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a different version to the mount previously designed. This design is mounted at the front of the CNC machine, rather than the top of the machine.
It uses the existing bolts of the machine to secure it. It is positioned so that it is is still in full view when the bed is pushed out to the maximum, and it does not hinder the movement of the bed at all.
NOTE: The cable connecting the controller to the motherboard was not long enough on my machine to reach this far. It was therefore required to use a little extension cable in order to be able to reach the offline controller.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Filament: Sunlu SPLA White
Category: 3D Printing