Bottom magnetic cable duct for PrusaBox by Printer box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative cable duct with magnets. More space, eliminates risk of damaging cables, easy to attach and to remove.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 76
- Wydruki
- 5
- Wyświetlenia
- 494
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The standard cable duct of the PrusaBox has two significant disadvantages. First, the click system can damage the isolation or break cables when squeezed (yes, it did happen to me) and second, it doesn't offer enough space in complex wiring setups.
My design is slightly higher and can easily be attached with its magnets. This eliminates the risk of damaging one or more cables 100%.
Last but not least, the cable duct is also much easier to remove in case changes need to be made to the wiring.
You will need:
Eight 8x4 or 8x3 magnets (fix them with superglue, if necessary)
Easy print without supports