Dressmaker Toy Fashion Design Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute way for your kids to design dresses and more with unlimited potential
- Ocena
- 4,667 / 5
- Polubienia
- 58
- Pobrania
- 481
- Wydruki
- 2
- Wyświetlenia
- 2137
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a fun dressmaker's mannequin toy play set. After buying a commercial product my daughter instantly said “I need more mannequins” and thus, a design was created. Now I have a lot of mannequins and a lot of fashion challenges in my life.
Required parts:
Orings - 11mm OD, 7mm ID, 2mm thick orings. Can easily be found on amazon.
Cloth - 150x150mm cloth cuts. 150x100 cloth cuts. 100mm ribbons for belts.
Print Tips (done on an ender3 v2 in PLA):
Base - Print with 2.8mm thick walls (or multiple of your nozzle). You want a really thick wall to keep the threads from snapping off when your kids are playing.
Retainer - Print standard settings, 20% infill, with the “hammer down” orientation. Support to base plate. Print 4x of these
Mannequin - Print standard high quality settings.
The threads can be a bit tight. Depending on your slicer you may need to chase them with a tap and die. M12x1.75.
Source:
Mannequin was modified from omegadarling, thank you for the scan! https://sketchfab.com/3d-models/dress-form-73cb17f243f242e4aec48836eade1f9d
The rest was modeled by myself in fusion 360.