1 / 5
Hitchhiker's Guide 42 Life, the Universe, and Everything baseplate — zdjęcie 1
1 / 5

Hitchhiker's Guide 42 Life, the Universe, and Everything baseplate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tribute to the Hitchhiker's Guide to the Galaxy, a base plate for a number 42.

Ocena
3 / 5
Polubienia
14
Pobrania
39
Wydruki
2
Wyświetlenia
594
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Changed the plaque so that it says 'Life, the Universe, and Everything' and has the Hitchhiker's Guide to the Galaxy symbol. Added a very shallow indent with more than enough tolerance so that the 42 sits in place and doesn't move around on the baseplate too much.

The 42, which I have included for convenience, is not my model.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

0.2/0.2-0.07

Infill: 

20%

Filament: 3DWarhorse, other PLA Blue, Silk Black


 

Notes:

 

I used PrusaSlicer's color change setting to have the print pause at the right layer so that I could manually change the filament, to give the plaque a dual-tone look to make it easier to read.

Post-Printing =============

Print the plaque lying down, in order to get the dual color print. Glue this to the baseplate piece on the slanted portion using a glue such as CA glue (superglue).

 

 

 

Category: Signs & Logos

Tagi