MagSafe iPhone, Apple Watch, and Airpods charging stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Credit for this design goes to https://www.thingiverse.com/jburd/designs and…
- Ocena
- 3,8 / 5
- Polubienia
- 64
- Pobrania
- 685
- Wydruki
- 5
- Wyświetlenia
- 5069
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Credit for this design goes to https://www.thingiverse.com/jburd/designs and https://www.thingiverse.com/grevtech/designs for adding the cable route organizer. I added another magsafe charging dock on the base for airpods/pro/gen3.
Rotate the print so it's sitting on it's side. I found it prints with less supports material if the side for the phone is touching the build plate (as seen in the picture).
Printed with 25% infill and 2 wall for most of the print. For the section between the phone and watch I printed at 50% infill and 4 walls for better strength and less chance of cracking the print when removing supports (I found out the hard way).
Category: 3D Printing