Shimano HG Cassette Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cassette spacer to go on the bottom of the stack to load a cassette onto a HG splined freehub.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 610
- Wydruki
- 1
- Wyświetlenia
- 2290
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
This is a simple part sized to go onto a Shimano-type freehub body underneath a 9sp cassette. The intended thickness is 1.85mm and the model includes a single tooth to engage the splines.
I can create other versions of this if desired - likely you'd want different thicknesses. Realistically, you could make this into spacers to convert a freehub into a single-speed.
I'll include STL, 3MF, F3D files at a minimum. The design was in Fusion 360.
PRINTING
I printed in ABS+, but probably PLA is just fine. Layer height can be pretty tall - 0.3mm. 3 Perimeters recommended. The 1.85 spacer is so small that infill doesn't really come into play.