Bedside Corner Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bedside corner shelf designed particularly for those with cabin beds or similar, making a traditional…
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 167
- Wydruki
- 1
- Wyświetlenia
- 861
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bedside corner shelf designed particularly for those with cabin beds or similar, making a traditional bedside cabinet impractical.
It has two shelves and a slot designed to hold a kindle.
There is cable routing to both shelves from underneath (with additional holes to use a cable tie to secure the cables.)
Shelves have a small lip to help things not to slide off.
There are screw holes in the sides, with access holes for doing up the screws where needed.
This is designed to (just) fit on an Ender 3. Oriented correctly it prints without supports.
I suggest using one of the 3d infill patterns for multi-directional strength - gyroid will be fastest.
This was designed in OnShape, where it is public, so you can find it on there if you want to modify it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
15%
Category: Organization