Ender 3 Belted Z - Symmetric Beefy Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix allows the user to have even more clearance in the Z direction, you will gain anywhere from 10-20 mm of Z…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This remix allows the user to have even more clearance in the Z direction, you will gain anywhere from 10-20 mm of Z height due to conflicting geometry being moved out of the way. To combat flex some areas have been beefed up even more.
The clearance for the holes has been increased to allow the user to install these brackets with T-nuts more easily.
NEW FEATURES -- There are 2 new blind holes on the bottom surface that makes direct contact with the 2020 extrusion, here are 2 M5 screws which stick out by about 1 or 1/2 of a mm. These new holes create clearance so the brackets can lay flat.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Filament: Geetech PETG Black
Notes:
Message me if you have questions of need further changes to the model
Category: 3D Printer Parts