1 / 3
Suzuki DL650 v-strom blinker/turn signal housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :) Very big thanks for "remote"…
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 244
- Wydruki
- 1
- Wyświetlenia
- 1595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (42)Powiązane
This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :)
Very big thanks for "remote" creating the modell toBarbér Máté.
Print Settings
Printer:
prusai i3 rework 1.5
Rafts:
No
Supports:
Yes
Resolution:
0.1-0.2
Infill:
30
Notes:
I printed from ABS but maybe it is good from PETG too...
Remove supports, check for the holes for the 2 screws. If neccessary use a drill.
Category: Automotive