Truma roof cap camper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a truma roof cap. I printed from ABS, but I think PETG is good to. The first is fits but a little bit it was a…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 388
- Wydruki
- 1
- Wyświetlenia
- 1587
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a truma roof cap. I printed from ABS, but I think PETG is good to. The first is fits but a little bit it was a little bit loose, bit it can be tighten. (it's in its plase about a month without a any problem)
I uploaded the thread lib too.
This version is not yet printed by me. I increased the thread from 59.5 to 59.7mm.
2017-04-18:
I increased the thread size to 60 (from 59.7). I printed only the thread to test it. It fits good for the original hole.
I also added stl file.
2018-09-13:
Okay, printed and tested the whole thing. The thread is good now.
Print Settings
Printer:
prusa i3 rework 1.5
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
30%
Notes:
I printed from ABS, but I think PETG is good to.
Printed with support, and later removed it.
Category: Automotive