SKR 1.3/SKR 1.4/SKR 2.0 DIN Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the ingenious design by jwags55. This remix is designed to fit BigTreeTech SKR 1.3/SKR 1.4/SKR 2.0 boards (Or…
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 252
- Wydruki
- 2
- Wyświetlenia
- 1922
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on the ingenious design by jwags55. This remix is designed to fit BigTreeTech SKR 1.3/SKR 1.4/SKR 2.0 boards (Or anything with an 84.3mm dimension). It should be a tight fit on 35mm DIN Rails and hold the board securely.Note: It's really easy for me to tune the parameters so if it's too loose/tight let me know in the comments and I can make some adjustments.
Features
- Snap fits to DIN and Board (No screws needed)
- Works with PLA
- Low profile
- No tools required
- Easy and fast to print (No supports)
Printing Tips
- Use 4 perimeters
- 4 Top/Bottom layers
- 20% Gyroid infill
Print Settings
Printer:
BLV Cube
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
Radio Shack :-) PLA
Blue
Notes:
I always printed these in PLA. PETG would probably be more durable and longer lasting.
Category: 3D Printer Parts