2.5 Inch HDD/SSD Caddy for multiple drives
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laser cuttable (or 3d-printable) part to stack up multiple drives
- Ocena
- 4,6 / 5
- Polubienia
- 95
- Pobrania
- 994
- Wydruki
- 5
- Wyświetlenia
- 6463
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Inspired by a model at thingiverse (https://www.thingiverse.com/thing:3544454) But needed something to be laser cut.
Designed to enclose the drives, which is why the ends are not symmetrical. You will (obviously) need two identical parts and 4 regular M3x6 caphead screws (or you can countersunk the holes) for each drive. Due to 12mm spacing, should fit the thicker 8mm SSD:s with ease and still leave some gaps for air.
Made parametric, though the hexagonal pattern only works for 12 mm spacing (at least for now). Included 4 and 8 drive versions and the original ipt-file (Autodesk Inventor).
I have not 3d-printed these, only lasercut, so if you end up printing these, a make and feedback would be great! The model is 3mm thick as I laser cut it from 3mm acrylic.
Made this for a friend. Pictures are from him.