Bubito Accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessories for BubbyFPV's Bubito.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 798
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a couple Bubito accessories I create to work with my setup.
RX Mount is made to mount with the Battery Holder but on the underside of the top-plate.
Battery Stop was designed to keep the battery from slipping forward during a crash.
Skids are skids! FYI, you'll want a 1.3mm Hex to install the motor screws of the Bubito!
Battery Mount is designed to work BetaFPV 1s 300mah("Loose" fit, needs battery stop to work), as well as Tattu 300mah HV 1s(Tight fit, does not require battery Stop. The stock holder was too tight for these.
Print files oriented as they come with No supports.
Printed with Sainsmart TPU
0.15 Layer height