4x5 single sheet daylight developing tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 4x5 single sheet daylight developing tank. it requires 150ml of developer.
- Ocena
- 4 / 5
- Polubienia
- 33
- Pobrania
- 215
- Wydruki
- 1
- Wyświetlenia
- 2368
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is 4x5 single sheet daylight developing tank. it requires 150ml of developer. You can easily load sheet in the dark bag and develop it at the daylight. For fixing and washing i recommend to use a small tray, its amazing to watch the fixing process on the light ! :D And you can be sure by observing it that it's fixed properly.
Print instructions
Print Settings
Printer Brand: Prusa
Printer: Prusa Mk1
Rafts: No
Supports: Yes
Resolution: 0.25
Infill: 100%
Filament: Prusa ABS, FLEX black
Notes:
Use on the built plate support just for the tank lid, and print it in upside down position.
I used the flexible material for the Cap and the O-ring.
Post-Printing
Extra waterproofing
For a longer lifespan of the tank i recommend to vapour-proof the whole tank and lid in Acetone vapours. During that also pour bit of the acetone into the tank to extra-seal the bottom. For the inlet part of the lid i used small brush and acetone to smoothen the first layer after the supports.