1 / 6
Magnetic Dust Boot for Makita Trim Router (CNC)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My v1 attempt at a magnetic dust boot for my cnc.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 545
- Wydruki
- 3
- Wyświetlenia
- 3628
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (1)Kolekcje (123)Powiązane
This is my attempt at a dust shoe for my Makita router powered Bluecarve CNC machine.
It's not perfect, but has been working well for me so I thought I would share.
Prints without supports and it uses 8x3 magnets from Bunnings. I used a hearth broom and hot glue for the brushes (you can also buy strips of proper brush).
hose port is 32mm OD for a standard shop vac hose.
The 2 base pieces are glued together, I used CA glue and accelerant.