Behringer TD-3 / RD-6 Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for the Behringer TD-3 Analog Bass Line Synthesizers and RD-6 Drum Machines available in different angles
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 1547
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A stand for the Behringer TD-3 Analog Bass Line Synthesizers and RD-6 Drum Machines consisting out of two side pieces that do fit it's casing nicely including recesses for the rubber feet. The bottom side of the stands do offer notches for adding some self-adhesive foam tape up to 10mm width.
Versions
The stand comes in multiple versions each using a different tilt angle from a 10° to 25° range to your liking - I personally do use the 10° version which is also the one shown in the pictures.
Print settings
- print the stand with the outer sides facing down towards the build plate
- no supports needed
- if your printer has a good build plate adhesion you won't need a brim to prevent the parts from warping
I did print the 10° version of the stand with a 0.15mm layer height in PETG on my Prusa i3 MK3S+ which resulted in a ~14h overall printing time.