rb04 anti ship missile model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print as is with 0.1 mm resolution, tree support and any infil percentage should work fine. I've almost managed to…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 472
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print as is with 0.1 mm resolution, tree support and any infil percentage should work fine. I've almost managed to print this down to 30 mm in length. With a resin printer you could probably go even smaller. I will add another file later that is printable in smaller sizes on an fdm printer
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci Jr. 1.0 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.1 mm
Infill:
20 %
Filament: Generic PLA white How I Designed This ===================
This is just a crude 10 minute model of the rb04 missile. Nothing here is to scale and all edges are sharp but at small sizes it looks fine.
Category: Props