Remix of awesome strap reel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With strap retainer
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 315
- Wydruki
- 12
- Wyświetlenia
- 1367
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
EDIT 1.27.23: at the request of the original designer, I have removed the loose unremixed parts. Please go over to his model if you need those.
This is a spectacular model, I've made 8 of them for all my straps.
The only change I made was to add a retainer to the outside edge for holding the rolled-up strap tail in place so it doesn't back out on you in the bag or whatever.
I've included 3 versions of 3mf project files. The one has all pieces including the crank, the others don't include the crank (you don't need 50 of those) and are in either 0.20 or 0.30 layer heights. I find the 0.30 works perfectly and it's a lot faster print.
My project files are sliced with 50% infill and 6 perimeters for strength. They are pretty much bullet proof.
Please see the original design for assembly tips and any other info I left off.