M5 Male Female Rubber Mounts (Bike Wheel Lock)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These were designed to fit a bicycle wheel lock but can be used for multiple purposes. They use a M5 threaded insert…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These were designed to fit a Urban Arrow bicycle wheel lock but can be used for multiple purposes.
They use a M5 threaded insert on one side (M5x6x7)
The other side you insert a length of M5 threaded rod heated up so it melts in like a threaded insert.
I printed in TPU with 100% infill. (this is quite stiff and you could experiment with 0 infill and magic number of perimeters to get a nice flex going..)
Print Settings
Printer:
Voron
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
N/A TPU
Category: DIY