Oxy-Mapp / Oxy-Propane Tank Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for Oxy-Mapp or Oxy-Propane torch tanks with carry handle and a spot for lighter and torch when not in use.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 381
- Wydruki
- 2
- Wyświetlenia
- 1745
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder for Oxy-Mapp or Oxy-Propane torch tanks with carry handle and a spot for lighter and torch when not in use.
I designed this to fit two standard North America size Berzomatic style Hand Torch Cylinders.
14.1 oz Propane
16 oz Mapp
14.1 oz Map-Pro
1.4 oz Oxygen
etc
Between the tanks is an area that can hold a sparking lighter, the torch (when cold) or any other small items.
Print/Build Notes
Requires 4 m4x12 bolts to attach the handle. The holes are threaded, but if you print with a large nozzle there will still be some self-tapping. m4x16 will also fit.
I printed mine with a 0.8mm nozzle and 0.4 layer height as this is built for function not beauty.
It's best to print the handle as shown in the attached screen shots. This gives the smoothest handle feel without having to bridge or support the area you hold. I also used 4 perimeters on the handle to provide increased strength. If printing with a standard 0.4mm nozzle, you may want to bump this or the infill percentage even higher.
Infill and perimeter count shouldn't matter for the main holder. I used 2 perimeters and 10% infill.