TiPX Magazine (OB-10)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ten round mag compatible with the TiPX, TCR, and M17 SMG.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 314
- Wydruki
- 0
- Wyświetlenia
- 2087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
NEW IMPROVED OB-X:
Hardware:
-20mm long M3 bolt
-M3 nut
-pen spring( 4mm x ~20mm)
-Dye DAM 10 round spring (from double stack 20 round mag)
I have yet to test D-mag springs. The DAM spring seems a little heavier than necessary for round ball.
Some parts may take minimal sanding. Insert the ball retainer and release bar from the bottom. Insert spring and follower before sliding everything together. The nut may need to be inserted using a soldering iron.
I have made several minor improvements since I first uploaded the project. The follower and channel are wider to fit First Strike rounds better. there are notches to work with the Milsig SMG. and there is a new body variation that only uses two parts instead of three. A special thanks goes to Kevin Robitaille from the Communautar Magfed Du Quebec podcast for doing extensive testing.
Please share your experience making and playing. I want to keep improving the design.
Do not release to follower with an empty mag.
There is a step file included. Please follow the copyright. Share your remixes for free in the spirit of the original.