Kossel - Non-invasive Inductive probe mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want to have a proper bed leveling on my Kossel. The issue I often had was the need to level before almost every…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I want to have a proper bed leveling on my Kossel.
The issue I often had was the need to level before almost every print to have something properly ok.
The inductive probe is this one: https://www.amazon.fr/gp/product/B01EZZOP7Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 "LJ12A3-4-Z / BY 3 fils DC 6-36V PNP NO 4mm Commutateur de proximité inductifs Capteur"
It needed some resistance soldering in order to have the good voltage to trigger it.
It needed as well to "flash" your firmware (marlin, repetier or any other)
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
50%
Filament: eSun PLA black
Category: 3D Printer Parts