☑️TKS GTR 2s-4s ☑️

TKS GTR Setup 1 : 

• TKS frame 3D printed ( NylonX bottom plate , PLA+ Top plate ) ☑️
• Flight Controller TuneRC 1s/2s ☑️
• Happymodel ExpressLRS rx ☑️
• PandaRC Nano VTX ☑️
• FPVCYCLE 13mm 6350kv 2mm Shaft☑️
•  HQprops 2.5"x2x3 ( Drill out to from 1.5mm to 2mm ) Can provide the tool ☑️
• 2s 450 mah - 650mah ( Could go up to 4s with a Different FC Firmware ☑️
• Quicksilver ( Preset 2" ) Flash,Bind,Preset,Fly FBPF !     ☑️

TKS GTR Setup 2 : 

• TKS Frame 3D printed ( Polymaker PC-MAX , Both Bottom/Top plate ) ☑️
• Flight Controller TuneRC 1s/2s ☑️
• ExpressLRS FYUJON ( RX (ceramic) + VTX ) ☑️
• Happymodel 1102 10000kv ☑️
• HQprops 2.5"x2x3 1.5mm ☑️
• 2s 450mah ☑️
• Firmware Quicksilver ( Preset 2") FBPF ☑️

I highly recommend using M2 motor mount instead of M1.4 ! You can find 1102 with 4 holes motor mount if you want to stick to that size .

Motors Suggestion : 

     Apex 1103 9999kv ✅

     Hyperlite 1204.5 8022kv ✅

     Xing Nano 1202 8000-10000kv ✅

     FPVcycle 13mm 6350kv 2s/3s ✅

     Happymodel 1102 10000kv ( M1.4mm screw ) ✅

Flight Controller : 

    Tunerc 1s/2s ( Recommended ) ✅

    Diatone Mamba 2s/4s ( If you want to push it ) ✅

    Happymodel  X12 1s/2s AIO ELRS VTX ✅

    Kiss Holybro FETtec AIO 15a Kiss Firmware 2s-4s ✅

My favorite setup ! 

One more flight ! 

For CNC services : 

https://cncmadness.com/  CAN

https://www.jacks3dprinting.com/  USA

Recommended Store : 

https://pyrodrone.com/  USA

https://fpvcycle.com/  USA  " My favorite motors 13mm 6350kv 2s/3s

https://rotorvillage.ca/  CAN

https://rotorgeeks.com/ CAN

https://www.tunerc.com/  “ The Best Flight controller for 1s/2s ” 

https://www.hqprop.com/  Propellers that will last ! 

Discord (Quicksilver DEV and SUPPORT) awesome community : 

https://discord.gg/8StVhvB6Tm  

Quicksilver Firmware and Configurator : 

https://github.com/BossHobby/Configurator/releases/tag/v0.5.4 

Media : 

https://www.instagram.com/tarkusx_fpv/ 

https://www.instagram.com/tarkusx_fpv/