1 / 2
Lens Holder for Xintai HT-201 IR-Camera — zdjęcie 1
1 / 2

Lens Holder for Xintai HT-201 IR-Camera

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach an additional lens to your USB IR camera for imrpoving its macro capability

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The HT-201 is an inexpensive IR camera module for your smartphone with fixed focus.

If you want to use it in near range, such as for locating hot spots on pcb boards the image is not very sharp. You can improve the sharpness and therefore resolution by adding an additional lens, such as a ZnSe lens with d=19mm and f=50,8mm which is available on eBay.

The lens holder is required for attaching that lens to the camera. If 19mm lenses are actually out of stock you could also take a 18mm or 20mm version. The FreeCad source is included and easy to modify for different lens diameters.

 To avoid a mess of support material the holder is splitted into two parts which will get glued together with CA clue. Both parts are printed with TPU and 0.2mm layer height.

Tagi