Garage Organization Hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a garage organization system that was modular to a french cleat design and easy to print (flat)
- Ocena
- 5 / 5
- Polubienia
- 158
- Pobrania
- 224
- Wydruki
- 1
- Wyświetlenia
- 5644
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
This system includes a 3d file (sorry I didn't clean it up, don't critique my modeling!) The last design has a locking groove to lock the hooks in place. It works really really well.
All you need is a ¾" plywood cleat with a 45 deg cut on one end and a groove cut on the other end. I modeled it based on my cleats but there should be a parameter to change the cleat width. Mine was roughly 3" or slightly under.
Please make more hook types, I want to see what ideas everyone else has. Currently I have:
- Battery holders (millwaukee / hilti)
- standard hooks with different widths
- coat hook
- chainsaw hook
- single low profile hooks (for ladders)
- cross country ski hooks and pole holders (haven't posted these yet)
Ideas and alternates for locking groove
The ¼" groove is easy to mill with a table saw or router, but you may wish to use a 45 deg slot (triangular) to eliminate supports on this piece. Please community, make this better than what I have.