Raindrop Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
The Raindrop Switch is a cost-effective accessibility switch, an assistive device used by people with physical disabilities to control electronics (e.g. phones, computers, adapted toys, game controls, etc.).
This particular switch is well-suited for use by a finger. It can be plugged into any standard 3.5 mm AT interface and even the Xbox Adaptive Controller. Users can arrange multiple switches in an array to get input from more than one finger. The switch can be mounted using adhesive on the rear surface.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: No
Rafts: No
Bill of Materials
To assemble the switch, you will need:
- 1 – 3D Printed Switch Base
- 1 – 3D Printed Switch Cap
- 1 – 3.5 mm mono cable
- 1 – 12 mm tactile switch
- ~1/3 – stick of hot glue
- 1 – 3D Printed 12 mm switch soldering jig (Optional)
Build Tutorial
Printed assembly manual can be found in the Files tab.
Additional Documentation
https://makersmakingchange.com/project/raindrop-switch
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea