1 / 3
Hand-y FUGG Guitar Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In light of having my store attacked I bring you FUGG.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 330
- Wydruki
- 1
- Wyświetlenia
- 3920
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (59)Powiązane
It's pretty straight forward to print and mount. For the main hand use PLA at 200c for the extruder, 60c for the bed, 2 walls, 1 surface layer, 30 percent infill and tree supports to print. More walls isn't necessary as it is plenty strong with just 2. For the padded insert print with TPU at 228c on the extruder, 0c for the bed, 2 walls and 20 percent infill.
Glue the 2 parts together and use a single 2 ½" screw to mount it onto the wall.