1 / 8
Artillery Sidewinder X1 4020 radial fan adapter for Mosquito Hotend — zdjęcie 1
1 / 8

Artillery Sidewinder X1 4020 radial fan adapter for Mosquito Hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Mosquito hotend originally comes with a quite noisy 2010 mini fan. I made this adapter to use a 4020 radial fan…

Ocena
0 / 5
Polubienia
7
Pobrania
41
Wydruki
0
Wyświetlenia
872
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Mosquito hotend originally comes with a quite noisy 2010 mini fan.

I made this adapter to use a 4020 radial fan like the one already used for the parts cooler.

The noise level has increased significantly.

The shape fits for the Sidewinder X1 carriage and assures it is not running into the end stop during homing. Other printers might need amendments.

Be sure to use a 24 V fan and check the polarity on the connectors as fans my replacement fan came with reversed polarity.

The original screws for the 2010 fan can be used.

Be careful with the clip which fixes the fan on the fan duct. It can break easily. Use PETG for better flexibility.

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

Yes

Supports:

Yes

Resolution:

0.2 mm nozzle, 0.1 mm layer height

Infill:

50%

Filament: Unknown PETG transparent


Notes:

The PETG used is quite stringy. Other brands might results in better optics.

I recommend using a 0.2 mm nozzle or a resin printer to achieve finer details.

Post-Printing

I used supports within the structure. But they could be removed easily.

How I Designed This

I designed it from the scratch based on technical drawings of the 2010 and 4020 fans.

Needed some iterations to assure the adapter does not run into the endstop during homing.

Category: 3D Printer Parts

Tagi