Tight And Secure Extruder Bowden Tube Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Bowden tube clip gets rid of the loose fit the original clip has at the extruder.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 153
- Wydruki
- 4
- Wyświetlenia
- 1053
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This Bowden tube clip gets rid of the loose fit the original clip has at the extruder.
My Ender 3 v2 had a lot of play at the fitting so I found a model that is designed to fix it. It worked very well but I had a lot of issues printing it and it would always break when I would go to remove the supports. I used one anyway that had a missing leg that secures to the tube. I was very happy with it, but it ended up breaking after a few days of printing.
Let me know if it works for you.
Enjoy!
Design
I designed this one from scratch, but I used the original model as a base for my design. My goal was to design it so as not to need any supports and to strengthen some of the weak points. I think it came out pretty good for my first 3D model. I don't think it will, but if mine's breaks, I will try printing it on its side to see if changing the layer lines will help.
It was designed using Autodesk Fusion 360 Personal.
Print Recommendations
- No supports
- 100% infill
- Orientate model clip side down
Additional Parts Required
You will also need a small zip tie to secure the clip to the tube.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: Flashforge PLA
Category: 3D Printer Accessories