Anti-Rattle Revo Nozzlebreak Holder for MK3S+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,57 € – 0,69 € netto (bez VAT)
Dla pliku: Revo Nozzle block Anti Rattle_0.2mm_PETG_MK3S_45m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,63 € netto (środek widełek).
- Masa podana przez autora
- 6 g
- Czas druku podany przez autora
- 44,4 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Anti-Rattle Revo Nozzlebreak Holder for MK3S+
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 67
- Wydruki
- 5
- Wyświetlenia
- 594
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Got an MK3S+ with a Revo Six? Tired of the nozzles rattling in the plastic holder that you printed? I was too. A bit of pondering and I realized that I could make a holder with a tapered hole that would hold the nozzle by the silicone sock, isolating the brass from the plastic and quieting things down. After a few iterations, here it is.
I was definitely inspired by Art G.'s idea, I just added a few more holes, then enlarged and tapered them to suit my needs. I also decreased the thickness to save printing time and filament.
Mine is printed in Jet Black Prusament PETG, 0.2 mm layer height, 0.4 mm nozzle, mainly because that is what I have on the printer now. I am sure other rigid plastics would work fine. I printed with the numbers down, and I added support for the counterbores in the screw holes. The stock M3X10 screws work OK, but if you have them, M3X12s might be a better option, as the screws only engage for a couple of turns. If you use the M3X10s, take care not to over-tighten them.
The GCode I uploaded is for my MK3S+, which has a few changes specific to the Revo Six I am using implemented. These changes include a longer, reversed purge line and a longer retraction after printing to allow for cold nozzle changes.