Hemera carriage for Hypercube Evolution (BLtouch + part cooling fan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed dbrandao's extruder carriage to suit my needs. I also created my own fan holder that uses a 40x40mm radial…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I remixed dbrandao's extruder carriage to suit my needs. I also created my own fan holder that uses a 40x40mm radial fan and holds a BLtouch. The following things of the source file have been changed:
- Square hole for endstop connector has been increased since my endstop didn't quite fit
- Counterbored holes for screws and nuts have been sunken +1.5mm to allow the use of the mounting screws that came with my Hemera
- Dowel pin and mounting screw hole have a chamfer to make it easier to mount it on the Hypercube's carriage
- Added an option to add strain relief tie-wraps
The probe offset is as follows:
X-3
Y-44
(Z-0,15 but you should verify this yourself)
Also be aware that in X the full 300 can no longer be reached since the Hemera is wider than the X-carriage. I don't mind this but its just an FYI.
Inventor part files included
Category: 3D Printer Parts