Microphone stand (tripod mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 1: I uploaded a second version with a 1/4-20 thread. I recently bought a microphone that came without a stand,…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 190
- Wydruki
- 2
- Wyświetlenia
- 1070
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Update 1: I uploaded a second version with a 1/4-20 thread.
I recently bought a microphone that came without a stand, but it did have a tripod mount. So obviously I made a stand for it!
Beware that this is the larger 3/8-16 UNC type thread and not the smaller (more common) 1/4-20 UNC thread you'll find on things like GoPro's. If there's any interest I'll edit the source for the smaller thread.
The mic is a BM-800 condenser mic from Banggood/Ebay
Print Settings
Printer Brand:
RepRap
Printer:
i3 Rework
Rafts:
No
Supports:
No
Resolution:
0.2 or lower
Infill:
any
Notes:
Slic3r did not slice this correctly, it only did infill every 3 layers or so. Cura worked just fine.
Category: Gadgets