Shift Mixer - Shimano / SRAM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shimano Brake - SRAM Shifter Here’s the missing link… IT BROKE - FINALLY --> replaced it. stronger version available now
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 197
- Wydruki
- 1
- Wyświetlenia
- 2225
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hooray, I can finally mount my SRAM shifter on my Shimano brake!
There are so many ways to fix problems by buying stuff. Here‘s my printed solution to a very common problem: the shifter won’t fit.
I am quite sure, that any material other than PLA will do, but I printed this part in Prusament PCCF. Although, I think regular PC or ASA would’ve been better. (But the looks of PCCF are just too good)
You have doubts in stability? Here’s the point: if it does break, what it won’t, you will still be able to brake, but not to shift.
Still afraid? Put one spare in your bag.. you’ll be safe on the trail.
But anyhow. I ride this thing for quite a while now. I do shred hard. So, no need to worry.
It is light weight. Small. Maybe not too pretty, but totally worth the print.
also, the angle can be changed to your desire.
It prints perfectly without supports.
Use it or take it as an inspiration to print rather than to buy so little and easy things.
Update July 24th-2024. It finally broke on me when I kicked it with my foot.
I reprinted it in PETG and also made some new updates to it.
It is available in newer versions now. Partly untested.
Update May 2025:
I have used the PETG-Version for almost a year now. It finally broke again after that duration. No problem - replace it with a fresh printed PETG part..
Okay, I finally milled mine from 7075 T6 (AlZnMgCu1,5). It will not break anymore.