Pads for Corength push-up bars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple flexible pads for "Corength" brand push-up bars/grips from Decathlon. The green rubber rubs off quite quickly…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Simple flexible pads for "Corength" brand push-up bars/grips from Decathlon. The green rubber rubs off quite quickly (at least mine did, draw your own conclusions ;) ). This could lead to marks on your floor, so these pads are meant to repair it with a minimum of fuss.
You need two pads per grip, they should stay attached by themselves (probably depends on the filament), but you can also add a drop of glue to be sure.
Print Settings
Printer:
Voron 2.4
Rafts:
No
Supports:
No
Resolution:
any
Infill:
none
Filament:
any TPU or other flexible
any color
Notes:
Use any rubber-like filament. I used Polyflex TPU and it worked out great. Softer ones are probably better. Print like any other flexible object, it should be an easy print, relatively speaking.
I used 15 mm/s, 0,2 mm resolution, no supports, rafts or infill, 260/80 °C.
Category: Sport & Outdoors